Valves

Pneumatic valves master catalog The new SC-Master2 catalog from Rexroth contains over 600 pages of technical and ordering details on industrial pneumatic directional control valves and electro-pneumatic pressure control valves. The directional control valve information is divided intosections including: Plug-in valve manifolds, traditional valve manifold systems, inline valves and manual/mechanical valves. A separate section details […]

 MINNEAPOLIS, MN – Wanner Engineering introduces the Hydra-Cell C64 Industrial Diaphragm Valve.  The industrial C64 features a sealless, flow-through design that provides pressure as high as 2500 psi (172 bar) with flow up to 40 gpm (151 lpm).  The C64 is ideally suited for applications requiring high pressure pumping of dirty fluids. The C64 valve […]

Greenland, NH – Beswick announced the release of a new ultra miniature M3 threaded slide sleeve valve (part number M3SV-N). The new M3SV-N slide sleeve valve is another addition to Beswick growing M3 product line. It provides efficient control (on/off) of gas or liquid in an in-line configuration. The valve can be attached directly in […]

Series CA44 valves are two station valve manifolds for AS-i serial link (bus) applications, complying with AS-I specification V2.11 Rev. 1. Manifold choices include: with or without digital inputs, and with or without auxiliary power. The valve stations can be 4-way, 2 position valves, or dual 3-way, 2 position valves, or a blanking plate. The […]

Series CA44 valves are two station manifolds for AS-I serial link (bus) applications, complying with AS-I specification V2.11 Rev. 1. Manifold choices include: with or without digital inputs and with or without auxiliary power. The valve stations can be 4-way, 2 position valves, dual 3-way, 2 position valves, or a blanking plate. The plug-in valve […]

The Maximatic line of pneumatic solenoid and air pilot valves come in 2-way, 3-way, and 4-way configurations and in port sizes from #10 to #32 to 1/2 in. NPT. The valves are available in either a direct-acting poppet or solenoid-controlled pilot operated balanced spool design. Clippard Instrument Laboratory, Inc. www.clippard.com ::: Design World ::

(Chicago, Ill) Designed for use in pneumatic emergency stop applications, this MV-EMS emergency stop valve fits a standard 30 mm panel mounting hole. The valve comes with a 40 mm red mushroom head push button which has a maintained and pull-to-release feature. These valves have standard 1/8-in. NPT ports, with optional 1/4-in. brass push to […]

(Lexington, KY) With a width of only 17 or 21 millimeters, the universally applicable TC08 and TC15 valves provide a high flow rate of 0.8Cv in the TC08 and up to 1.5Cv in the TC15.  A combination of in-line and manifoldable valves offer the user flexibility. Individually or in a valve manifold, as a TC08 […]

(Lexington, KY )– The new LS04 pneumatic valve series from Rexroth has dimensions of only ten millimeters width and a flow rate of 200 l/min (0.2Cv) up to a maximum of 330 l/min (0.33Cv). The LS04 series comes in three different designs: a mini valve with optimized dimensions and a flow rate of 200 l/min […]

The Beswick NV3 series ultra-miniature needle valve provides precision flow metering in a package smaller than a penny! It is designed with an ultra-miniature M3 metric thread and integral hose barb to minimize size. The NV3 needle valve can be specified in brass or 303 Stainless Steel with either Buna-N or Fluorocarbon O-rings.   We […]