• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer
  • Advertise
  • Subscribe

Pneumatic Tips

Tips, Trends, Resources, News and Information

  • Blog
  • Industry News
  • Air Preparation
  • Engineering Basics
  • Components
    • Actuators
    • Cylinders
    • Fittings
    • Gears
    • Grippers
    • Pumps
    • Air Compressors
    • Tubing
    • Vacuums
    • Valves
  • Pressure Sensing
  • Design Guide Library
  • Classrooms
    • Pneumatics Classroom

Ashcroft

Pressure gauge withstands high overpresssure

April 5, 2019 By Paul Heney

Ashcroft T6500

The Ashcroft T6500 stainless steel, solid front pressure gauge is now available with the XRA overpressure option. This feature adds an overpressure mechanism that restricts the motion of the Bourdontube after the specified full scale value is reached.As a result, the gauge can withstand up to 400% overpressure without damage, often eliminating the need for […]

Filed Under: Pressure Sensing, Uncategorized Tagged With: Ashcroft

Increased Protection for Pressure Gauges

April 15, 2014 By Jennifer Calhoon

Ashcroft

Ashcroft now offers a protective rubber boot for lower connected types 1000, 1005, 1005P, 1005S, 1005P-XUL and 1005M-XRG commercial pressure gauges. In addition to the patented shock-resistant PowerFlex™ movement, the boot provides added protection if the gauge is struck while installed or dropped during portable use. Ashcroft www.ashcroft.com

Filed Under: Components, Pressure Sensing Tagged With: Ashcroft

Compact Stainless Steel Explosion-Proof Pressure Switch

July 26, 2013 By Stacy Combest

Miniature Explosion-Proof Pressure Switch

The Ashcroft A-Series miniature pressure switch is now available in a SIL capable explosion- proof configuration for hazardous areas. With 316 stainless steel construction, an IP67 rated enclosure and an operating temperature range from -40°C to 89°C (-40°F to 192°F), the rugged dual-seal rated A-Series explosion-proof pressure switch stands up to the most extreme environmental […]

Filed Under: Components Tagged With: Ashcroft

Ashcroft’s “instrument doctor” makes house calls for gages

May 3, 2012 By Paul Heney

To prevent failures and maximize efficiency, Ashcroft is offering a free check-up of the pressure and temperature instrumentation used in your facility.

Filed Under: Pressure Sensing Tagged With: Ashcroft

Ashcroft introduces compact, multi-application pressure switch

March 28, 2012 By Paul Heney

A Series pressure switch is 316 stainless steel construction, a weatherproof IP67 enclosure and an operating temp from -40°C to 100°C (-40°F to 212°F).

Filed Under: Featured, Pressure Sensing Tagged With: Ashcroft

Industrial-strength pressure sensing

November 10, 2011 By Paul Heney

Ashcroft A2, A2X and A4 pressure transmitters answer the call for an accurate, rugged and reliable heavy duty sensor. Available in accuracies up to +/-0.25% F.S., the A2 is offered with a wide variety of electrical connections, analog output signals and pressure ports to meet the requirements of most any industrial application.

Filed Under: Pressure Sensing Tagged With: Ashcroft

Master gauges for pressure instrument testing, certification

October 4, 2011 By Paul Heney

When testing or certifying pressure monitoring devices, the calibration you perform is only as good as the master instrument you use for comparison. Ashcroft has carefully engineered the Type 1082 and 1084 test gauges for sustained accuracy and high reliability.

Filed Under: Pressure Sensing Tagged With: Ashcroft

Pressure gages keep flutter to minimum

September 12, 2011 By Paul Heney

To avoid overspending, Ashcroft pressure gauges equipped with PLUS! Performance will eliminate the need for an expensive liquid fill while still controlling pointer flutter due to pulsation and vibration.

Filed Under: Pressure Sensing Tagged With: Ashcroft

More choices for pressure transducers

March 3, 2011 By Paul Heney

The Ashcroft G2 pressure transducer is now available with a larger selection of electrical and pressure connections. Deutsch DT and DTM along with the AMP Superseal 1.5 connection provide moisture resistance along with proven latch designs that prevent inadvertent disconnection.

Filed Under: Pressure Sensing Tagged With: Ashcroft

Primary Sidebar

Fluid Power World Digital Edition

Fluid Power World Digital EditionBrowse the most current issue of Fluid Power World and back issues in an easy to use high quality format. Bookmark, share and interact with the leading design engineering magazine today.

RSS Featured White Papers

  • eBook: Practical Guide to Pneumatics
  • Saving energy and service cost with electric linear systems
  • White Paper-How to Design Efficient Pneumatic Systems!

Fluid Power Design Guides

fluid
“pt
EXPAND YOUR KNOWLEDGE AND STAY CONNECTED
Get the latest info on technologies, tools and strategies for Fluid Power Professionals.
Hose Assembly Tips

Footer

Pneumatic Tips

Fluid Power World Network

  • Fluid Power World
  • Hose Assembly Tips
  • Mobile Hydraulic Tips
  • Sealing and Contamination Tips
  • Fluid Power Distributor Lookup

PNEUMATIC TIPS

  • Subscribe to our newsletter
  • Advertise with us
  • Contact us
  • About us

Copyright © 2025 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy