• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer
  • Advertisers
    • Advertise
    • PR Submissions
    • Eblast Submissions
  • Subscribe

Pneumatic Tips

Tips, Trends, Resources, News and Information

  • Blog
  • Industry News
  • Air Preparation
  • Engineering Basics
  • Components
    • Actuators
    • Cylinders
    • Fittings
    • Gears
    • Grippers
    • Pumps
    • Air Compressors
    • Tubing
    • Vacuums
    • Valves
  • Pressure Sensing
  • Design Guide Library
  • Classrooms
    • Pneumatics Classroom
You are here: Home / Components / Rid yourself of remote frustration with connected monitoring

Rid yourself of remote frustration with connected monitoring

October 16, 2026 By Mary Gannon

Share

By Ron Marshall, Contributing Editor

I have spent more than two decades traveling from plant to plant performing compressed air audits, and over the years I’ve learned one frustrating truth: sometimes the hardest part of an audit was not diagnosing the system but simply getting good data.

Like many compressed air auditors, I have driven thousands of miles carrying pressure sensors, flow meters, and data loggers into noisy compressor rooms. More than once, I have returned to a plant only to discover a dead battery, a disconnected wire, or a valve that someone had accidentally closed during the test period. Entire trips were wasted.

Technology has changed in the compressed air industry.  There are many new ways to gather remote data from a system to help diagnose problems and keep the system running smoothly.
Technology has changed in the compressed air industry. There are many new ways to gather remote data from a system to help diagnose problems and keep the system running smoothly.

One failed logging session especially stood out. I had driven for hours to install monitoring equipment at a remote plant. Everything appeared normal when I left. But upon returning a week later, I discovered an isolation valve had been closed shortly after installation, leaving the flow meter with almost no usable data. The customer was frustrated, and we now needed to start the entire process all over again.

For years, situations like this were simply accepted as part of compressed air auditing. Then cell-connected monitoring systems began changing everything.

The first time I used a connected monitoring system, I immediately saw the difference. Instead of waiting days or weeks to retrieve information, I could now monitor pressure, power, flow, and compressor performance remotely from my laptop or phone.

That technology quickly proved its value at a bean processing facility that had installed a new variable speed drive compressor. Minutes after startup, I noticed the pressure settings were too high, and the compressor was spending too much time unloaded. In the past, this problem might not have been discovered until long after I had left. Instead, I called immediately, the settings were corrected on the spot, and system efficiency improved before the project was even completed.

At another meat processing facility, the remote dashboard showed that the least efficient compressor was doing most of the work while a newer VSD unit sat nearly idle. A simple pressure adjustment corrected the issue and saved the plant approximately $10,000 per year in electricity costs.

The biggest surprise came from a sawmill located more than 1,200 miles away. Without leaving my office, I was able to view live system data and realize the compressors were operating inefficiently. After guiding the maintenance team through a few control changes remotely, the plant reduced wasted energy enough to save roughly $22,000 annually.

Today, I believe connected monitoring systems are transforming compressed air auditing. Problems that once took weeks to discover can now be identified in minutes. For auditors, service providers, and plant personnel alike, these systems mean faster troubleshooting, lower operating costs, and fewer surprises.

You might also like

Filed Under: Air Compressors, Components, Engineering Basics, Positioning sensors, Pressure Sensing

Primary Sidebar

Fluid Power World Digital Edition

Fluid Power World Digital EditionBrowse the most current issue of Fluid Power World and back issues in an easy to use high quality format. Bookmark, share and interact with the leading design engineering magazine today.

RSS feed: Featured White Papers Featured White Papers

Fluid Power Design Guides

fluid
“pt
EXPAND YOUR KNOWLEDGE AND STAY CONNECTED
Get the latest info on technologies, tools and strategies for Fluid Power Professionals.
Hose Assembly Tips

Footer

Pneumatic Tips

Fluid Power World Network

  • Fluid Power World
  • Hose Assembly Tips
  • Mobile Hydraulic Tips
  • Sealing and Contamination Tips
  • Fluid Power Distributor Lookup

PNEUMATIC TIPS

  • Subscribe to our newsletter
  • Advertise with us
  • Contact us
  • About us

Copyright © 2026 · Arrowfly LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Arrowfly.

Privacy Policy