• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer
  • Advertisers
    • Advertise
    • PR Submissions
    • Eblast Submissions
  • Subscribe

Pneumatic Tips

Tips, Trends, Resources, News and Information

  • Blog
  • Industry News
  • Air Preparation
  • Engineering Basics
  • Components
    • Actuators
    • Cylinders
    • Fittings
    • Gears
    • Grippers
    • Pumps
    • Air Compressors
    • Tubing
    • Vacuums
    • Valves
  • Pressure Sensing
  • Design Guide Library
  • Classrooms
    • Pneumatics Classroom
You are here: Home / Components / Humphrey Products 410M Series Manifold

Humphrey Products 410M Series Manifold

February 4, 2010 By admin

Share

The Humphrey Products 410M Series Manifold is designed to accommodate the standard 310 and 410 inline solenoid valves. This special design enables mounting both 3-way and 4-way valves on the same manifold, with the 310 Series mounting orientation determining the normally closed (NC) or normally open (NO) function. Manifolds are available in 2, 4, 6, 8 or 12 station lengths. The manifold contains two galleys, one is common media supply port and the other is a common vent/exhaust port. Other accessories include manifold station block-off plates, a separate 12-station control board that simplifies electrical connections between valves and/or sensors.

humphrey-410-M-Series

The Humphrey Products 310 and 410 solenoid valves are versatile, robust components for any pneumatic application. This balanced poppet design makes them ideal for low power and high flow applications. The 310 and 410 Series valves are compact 1/8-inch ported 3-way and 4-way direct acting solenoid valves. The short-stroke balanced poppet design permits rapid cycling and requires no lubrication. The 310 series can be plumbed normally open, normally closed or as a selector or diverter.

The 310 Series valves have a 0.12 CV; the 410 Series valves have a 0.14 CV. Both valves are rated for air and inert gas from vacuum at 28-inches Hg to 125 psig. The continuous duty coil has a power consumption of 4.5 Watts, comes with flying leads and is available in a range of AC and DC voltages. A push, non-locking manual override is standard. Options include conduit connectors, plug-in DIN-type connectors, locking override, and built-in flow controls on the 410 Series valves to save space, weight and the additional cost of external flow controls.

Humphrey Products
www.humphrey-products.com

You might also like

Filed Under: Components, Featured, Valves Tagged With: 410m series manifold, humphrey products, pneumatic components

Primary Sidebar

Fluid Power World Digital Edition

Fluid Power World Digital EditionBrowse the most current issue of Fluid Power World and back issues in an easy to use high quality format. Bookmark, share and interact with the leading design engineering magazine today.

RSS feed: Featured White Papers Featured White Papers

Fluid Power Design Guides

fluid
“pt
EXPAND YOUR KNOWLEDGE AND STAY CONNECTED
Get the latest info on technologies, tools and strategies for Fluid Power Professionals.
Hose Assembly Tips

Footer

Pneumatic Tips

Fluid Power World Network

  • Fluid Power World
  • Hose Assembly Tips
  • Mobile Hydraulic Tips
  • Sealing and Contamination Tips
  • Fluid Power Distributor Lookup

PNEUMATIC TIPS

  • Subscribe to our newsletter
  • Advertise with us
  • Contact us
  • About us

Copyright © 2026 · Arrowfly LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Arrowfly.

Privacy Policy