Right from the start, simple handling was one of the most important features of the AV valve system series. Pneumatics specialists from Aventics have taken this approach one step further and now have a new solution to showcase at the Hannover Messe 2018. With outlets on the bottom, the AV system is optimized for installation […]
RSe series from Ross Controls provides safe exhaust and cylinder return
ROSS Controls introduces its new RSe series sub-base mounted valves for safety exhaust (dump) and safe cylinder return applications up to Category-4, PL e. The safety function of the 3/2 RSe series valve is to supply compressed air to a machine/system until signaled to shut off and exhaust any pneumatics energy from downstream of the […]
ISO valves and manifolds
ISO-standard valves are widely used in a wide range of industrial applications. Hafner Pneumatik, Kornwestheim, Germany has recently developed a range of ISO 4 valves and manifold plates. Single- as well as double-solenoid, 5-way valves are available. And designs include modular manifold plates with all ports on one side, as well as single base plates. […]
New M35 Series modular double valves ensure safety
Ross Controls has introduced its new M35 Series safety exhaust (dump) valve for Category-4, PL e machine guarding applications. The safety function of the M35 Series valve is to shut off supply of pneumatic energy and to exhaust any pneumatic energy from downstream of the valve. The Ross M35 Series double valve includes the 3/2 normally closed […]
Clippard launches high-flow proportional electronic valves
Clippard’s newest DVP series proportional solenoid valves are precision-built 2-way control valves, utilizing a unique, patented valving principle. This powerful series was designed as the next generation of the well-known and trusted original EV line of Clippard “Mouse” valves. With a life of more than a billion cycles, a solid, compact design, and extremely high flow rates, […]
Koganei’s William Miller discusses the company’s F Series solenoid valves
At the recent IFPEX Show in Japan, Koganei USA’s William Miller stopped to chat with us about the company’s booth, as well as its F Series solenoid valves. The company’s 13 U.S. distributors can assemble and build the F Series within 24 hours. The company will soon be debuting an input/output addition to the product line. […]
Pneumatic design 101: Go with the flow
The benefits of pneumatic power can be realized by following some basic pneumatic design rules for specifying air preparation units, actuators and valves. Contributed by Chip McDaniel, Educational Specialist at AutomationDirect Compressed air use by industrial machines is a close second to the use of electricity in terms of cost, and well ahead of other […]
ROSS Controls acquires industrial division of Automatic Valve Corp
ROSS Controls, Troy, Mich. has acquired the Industrial division of Automatic Valve Corp., as of September 1. Automatic Valve is ISO certified, offering a history dating to 1945. The company manufactures pneumatic industrial valves for a broad range of industrial automation, automotive, and process control applications at its Novi, Mich. facility. Automatic Valve markets its […]
Robust pneumatics helps packaging manufacturer set it then forget it
Elopak equips fully aseptic filling machine with robust pneumatics. By Xavier van Aelst, Director Food & Beverage and Christian Broich, Sales Engineer, AVENTICS GmbH, Laatzen, Germany Machines for filling consumer-friendly containers with milk or juice have to work around the clock, and disruptions and downtime are not at all welcome. For this reason, availability plays […]
What are solenoid valves?
A solenoid valve is an electrically activated valve, typically used to control the flow or direction of air or liquid in fluid power systems. Solenoid valves are used in both pneumatic and hydraulic fluid power systems, and most often in either poppet or spool configurations. The spool or poppet of the valve is connected to […]
- « Previous Page
- 1
- 2
- 3
- 4
- 5
- …
- 30
- Next Page »
